>Lately, I have been posting about Cricuts, telling you about my newest family member, and just Tricia. One of the things I have said when starting this blog is to have the creations I make on display. Well I have not been doing that. I explained that in past blog posts. To be honest, I had a creative slump. So without further ado, my latest stuff.
My first tag is very simple, but the paper is very complicated. The first thing I did was doubled the paper. The first paper is from The Paper Company, and it is called, “Gold Foil Leaf on Ivory”. The second piece of paper is just a plain sheet of ivory. I created an adhesive “sandwich” with my Tombow adhesive runner, and matched the corners and sides. I cut out the cards with Tags, Bags, Boxes and more. Since there was two sheet of paper, the settings I used on my expression were 6 on the blade housing setting. For beginners, you get this setting this way: where the housing for the blade is (just above where the mat would feed in), the blade housing has 6 settings, and each setting determines how far the blade goes in the paper in order to cut it. A 1 setting is perfect for vellum, because the thinnest and delicate nature of the paper. A 6 setting is for thick paper. By me adhering the two together, made the whole thing very think. To make a clean cut, I hit the multicut button. Multicut cuts 2, or 3 times, depending on the settings that the operator sets in the settings area (more on that in another post.). The tag is on page 90 in the handbook. I choose Blackout (hit shift to get the one with the one with the hole in it). The size is 4”.
Oh, one thing I forgot to point out, the settings above is for the Expression, Create, and Cake machines. If you have the Original or the new Imagine machines, follow the instructions for the Imagine machine, and the original machine does not have the buttons I am speaking about. The instructions also are for the machine only, and does not cover anyone who has Sure Cuts a Lot, Make The Cut, Design Studio or the Gypsy to help them cut with their cricut machine.
Once the tags were cut, I used a sepia tone color to age the tags, and I noticed that when I touched the tags, they felt as though they were worn, and have been made for years, which is what you want, if you want to achieve the look of an distressed, aged tag.
Just a note:
I have also made note cards. The first one was cut using the DreamKutz machine. You can get the same cut using a paper trimmer. Cut a sheet of 8 ½ x 11 sheet of paper horizontally and fold in half. I rounded the corners with a corner punch, and then cut a piece of Heidi Grace paper to match the front of the card, only 1” smaller. I did not purposely put an image or ribbon on the card to let the beauty of the paper. I printed off “Just a note”, and rounded the bottom right and the top left corners. I took forest green ink and put it around the edges.
The second “Just a note” cards are a little bit simpler. Again with the DreamKutz machine, I cut 12 x12 paper and cut it six pieces, each equally, folded them in half to form 3×3 cards. This is the Bazzill Bling paper, and cut a double-sided sheet of paper to size to match the front. The words, “Just a Note”, is printed on a piece of burgundy paper. Envelopes will be with both sets of cards.
Well that is it for now. I hope you have a wonderful week. God bless you.